Manufactures Cusell, S.L.

Rubber gaskets and seals

SILICONE GASKETS

 Silicone has excellent stability and flexibility at very low as well as at very high temperatures. It is very resistant to compression, oxygen, solar light, ozone and humidity and it is apt for food and pharma applications.

  - Gaskets cut from sheet.

Solid silicone gaskets

Standard colours: Translucent, White, black, red and blue.

For larger series, any RAL colour can be produced.

 

Hardness: Standard 40º/50º/60º/70º Sh. A.

Other hardnesses on request

Minimum thickness: 0,3 mm

 

Sponge/foam silicone gaskets

 

Standard colours: White, red, black

For larger series, any RAL colour can be produced.

Densities: 200/250/400/530 Kg/m3




 - Gaskets with food, FDA and pharma certification.

 - Gaskets in conductive silicone.

 - High temperature silicone gaskets (+270 ºC).

 - Silicone metal detectable gaskets. (Black or blue).

 - Silicone gaskets for vacuum membranes.

 - Silicone adhesive for bonding the gasket to other materials.


EPDM Gaskets

Epdm,gaskets and seals are resistant to outdoor elements in general, ozone, oxidization, UV light, ionized and cosmic radiations.
 
Gaskets cut from sheet 


Solid EPDM gaskets and seals

Standard colours: Black or white (the latter with FDA approval)
Other colours avalable upon request (Quantity dependent)
Standard hardnesses: 40º/50º/60º/70º/80 ShA.
Special hardnesses: Upon request
Minimum thickness: 0,5 mm

Foam/sponge EPDM gaskets and seals 

Standard colours: Black, grey, red, blue, yellow, greeen and white.

Standard hardnesses: 10º-15º/20º-25º/30º-35º Sh. A.
Density: 110-150 Kg/m3
Minimum thickness: 1,5 mm




Other types of EPDM available: 

  • Antistatic
  • Approved FDA and WRAS
  • Reinforced with textile or metal mesh
  • Vulcanized with Peroxide.
  • With adhesive


NBR  gaskets and seals
NBR has excellent resistance to transmission fluids, hydrolic fluids, lubricants and other non-polar petroleum based products.

Gaskets cut from sheet
Solid NBR:

Standard colours: Black or white (the latter with FDA approval)

 

Other colours avalable upon request.


Standard hardnesses: 40º/50º/60º/70º/80 ShA.
Other hardnesses upon request
Minimum thickness: 0,5+0,2 mm
 
Foam or sponge NBR 

Standard colours: Black, grey, red, blue, yellow, greeen and white.


Standard hardnesses:10º-15º/20º-25º/30º-35º ShA.
Others upon request
Minimum thickness: 1,5 mm

Available types of NBR:

  • Approved FDA.
  • Reinforced with textil mesh
  • High content
  • With adhesive


NEOPRENE Gaskets and seals
Neoprene has very good resistance to outdoor elements in general and especially ozone. Excellent resistance to

non-polar petroleum based products


 Gaskets and seals cut from sheet
 Solid neoprene:

Standard colours: Black or white (the latter with FDA approval)

 

Other colours avalable upon request.

 

Standard hardnesses: 40º/50º/60º/70º/80 ShA.
Other hardnesses upon request
Minimum thickness: 0,5+0,2 mm 

Foam/sponge neoprene gaskets 

Standard colours: Black, grey, red, blue, yellow, greeen and white.

Standard hardnesses:10º-15º/20º-25º/30º-35º ShA. 
Others upon request

Minimum thickness: 1,0 

 

– 0,5+0,2



Available neoprene types: 

  • M2 . Incombustibility. Common use in rail and automotive sectors. UNE 23727 Reaction to fire Class M2 
  • M2 F3. Incombustibility. Commen use in rail and automotive sectors. UNE 23727 Reaction to fire Class M2 -. NF F16101 Toxicity and smoke Class F3
  • ApprovedFDA.
  • With textile mesh reinforcement.
  • High content
  • With adhesive backing on one or two sides


VITON® (FKM) GASKETS
We produce gaskets and seals in Viton®, a high quality rubber compound with extraordinary resistance to chemicals, ozone, oils, thinners and fuels. Viton® gaskets also have very good stability at high temeperatures. 

Standard coluor: Black 
Standard hardness: 70º Sh. A
Specials: Upon request
Minimum thickness: 0,5 mm

We manufacture in:

  • Viton® A
  • Viton® B


POLYURETHANE GASKETS

Standard colours: Black, orange or red.
Standard hardnesses: 45º/55º/70º/80º/90º/95º
Specials: Upon request
Minimum thickness: 1 mm

Polyurethane gaskets can be made with adhesive backing on one or on both sides

DIAPHRAGM SEALS 
Diaphragm seals manufactured from specific materials, such as Hypalon, Nitrile or Neoprene with Nylon reinforcement depending on the requirements of each aplication.

Thicknesses from  0,2 to 3,0 mm.

Some materials certified to UNI 91777 class 1 and NF F16101 class 3

GASKETS IN OTHER SYNTHETICAL RUBBERS

  • Gaskets in BUTYL
  • Gaskets in HYPALON®
  • Gaskets in CSM
  • Gaskets in VAMAC®

GASKETS IN NATURAL RUBBER 



  • Gaskets in textile reinforced NR/SBR 
  • Gaskets in metal reinforced NR/SBR
  • Gaskets for food stuffs (FDA)


10/12/2013

Septa seals

We manufacture septa seals for the pharmaceutical and chemical industries. [+]

04/12/2012

New price list for EPDM gaskets PN10/16

Flat EPDM gaskets UNE 681-1/WA/WC/70 in PN10/16 for potable water. [+]

Copyright © Tel. (+34) 93.713.17.34 | Fax (+34) 93.713.14.64 | Email export@mcusell.com
Polgono Industrial Can Humet de Dalt Antoni Tpies 7-9 Nave F 08213 Poliny Barcelona - SPAIN - GPS: N 41.53881 E 2.16185
Disclaimer | Contact | Webs Amigas | Clonica.net