Manufactures Cusell, S.L.

Materials

Compressed material for gaskets

  • Belpa ®, Klinger ®, Tesnit ®, Frenzelit ®, Victor Reinz ®, ...
See chemical compatibility chart

  BELPA®MOID
Cellulose based material impregnated with plasticised gelatine. Very economical material with excellent oil and fuel resistance, its main market is automotive. This material must be protected from sudden changes in humidity and temperature to prevent dimensional changes.  More info

 
BELPA® CSA 25
Compressed sheets manufactured with organic and mineral fibers mixed in a rubber matrix. The product BELPA® CSA - 25 is suitable for a wide range of applications with low levels of responsibility. This material has low gas permeability and cost, that makes this asbestos-free product suitable for most common uses (air, water, some oil and heavy grease).
Material specially designed for water, air, gas and general moderated applications. More info
 
  BELPA® CSA 45
Compressed sheets manufactured with organic and mineral fibers mixed in a rubber matrix with NBR. The product BELPA® CSA - 45 is suitable for a wide range of applications with low levels of responsibility. This material has good resistance to oils and low gas permeability, that makes this asbestos-free product suitable for most common uses at low temperature and pressure (air, water, oil, solvents, etc). Material specially designed for water, air, gas and oils and general moderate applications. More info
 
  BELPA® CSA-55
Compressed sheets for gaskets CSA - 55 are manufactured with aramide and high quality mineral fibers mixed in a synthetic rubber matrix. This material has got exceptional flexibility and behaviour on cutting what add to its characteristic of under-control swelling in oils making a material with good suitability for the automotive industry. It is designed for demanding applications where torque retention, compression, excellent adaptability and low gas permeability is required. It is particularly suitable for oil. air and coolant applications and in general purpose engine gasket.  More info
 
  BELPA® CSA 56
Compressed sheets for gaskets CSA - 56 are manufactured with aramide and high quality mineral fibers mixed in a synthetic rubber matrix. This material has got exceptional flexibility and behaviour on cutting what add to its characteristic of under-control swelling in oils making a material with good suitability for the automotive industry and machinery construction for general use. It has good resistance to compression, excellent adaptability and low gas permeability. More info
 
 
BELPA®CSA 50
Compressed sheets for gasket BELPA® CSA-50 are manufactured by comprising a matrix of elastomers and inert fillers reinforced with aramid and inorganic fibres which confer temperature and pressure resistance to the material, making it suitable for a wide range of industrial sealing applications. Gasket joint material used in whole services of industrial plants and in special in water, gas, oils and hydrocarbons (up to a moderated temperature) pipes. More info
 
  BELPA® CSA 320
High quality compressed synthetic fibre jointing sheets based on aramide and special mineral fibers mixed in a rubber NBR matrix. This material has got high compressibility and low gas permeability, excellent characteristics for many industrial services. Material suitable for use with air, water, oils, hydrocarbons and gases. Particularly suitable for use in compressors, and in shipbuilding and hydraulic systems. More info
 
  BELPA® CSA 90
Compressed sheets for gaskets CSA - 90 are manufactured with aramide and high quality mineral fibres mixed in a rubber NBR matrix. This material has got high compressibility, good resistance to traction and low gas permeability, excellent characteristics for many industrial services, where the high demand of resistance to temperature and pressure must be combined. More info
 
  BELPA® CSA 120
Gasket sheets BELPA CSC - 120 are manufactured with a mix of carbon and aramid fibers in a matrix of high quality synthetic rubbers. This material has a very good mechanical resistance and an acceptable resistance to steam. This material is suitable for a wide range of industrial services. More info
 
  BELPA® CSA 420
High quality compressed non asbestos fibre jointing sheets based on aramide and special mineral fibers mixed in a NBR rubber matrix. This material offers high stress relaxation (Grade Y), high compressibility and low gas permeability, excellent characteristics for universal services. Material suitable for use with air, water, oils, hydrocarbons, gases and common uses. Particularly suitable for use in compressors, pumps, valves and OEM equipment. More info
 
  BELPA® CSA 520
BELPA CSA-520 is a high quality compressed non asbestos fibre jointing sheet made with aramide and high quality mineral fibers in a NBR rubber matrix. BELPA CSA -520 has the lowest gas permeability value, with the highest tensile strength and the best flexibility. BELPA CSA 520 is a high-tech product with the highest stress relaxation value ( GRADE X ) in the market. Material suitable for many uses and with most of the fluids . Universal gasket material for every equipment and services. More info
 
  BELPAACID
Compressed non-asbestos gasket sheet made on the basis of aramid and mineral fibres, combined with inorganic fillers, reinforcing a special rubber formulation. The resulting gasket sheet is recommended for use on a wide range of service conditions with chemical resistance to many products including most of the acids, oils, alkalis and solvents. The product has been designed for use with the acid and alkali media most frequently found in industry.  More info
 
 
BELPAGRAF
Pure expanded mineral graphite laminated. Due the natural characteristics of graphite this is a high quality material with an universal use in high pressure and temperature services. Excellent resistance to steam. Meets most refinery, petrochemical and industrial service requirements for long time periods and a wide range of temperatures. More info
 
  BELPAMICA
BELPA® MICA for high temperatures is made of shelly Mica compressed in sheets reinforced with perforated stainless steel 316 without binder. This material is suitable as high temperatures gaskets at low pressures and specially designed for services where high temperatures combined with fluids could promote the oxidising process of materials such as graphite. Recommended for high temperature turbines, turbochargers, heat exchangers, hot dry gas applications and on the whole for high temperature services. In automotive industry is suitable to be used in exhaust manifolds and engines. It is also recommended for chemical, petrochemical industry and refining plants where high temperature operations are carried out (mainly pyrolysis and catalysis processes). More info
 
  BELPAFLEX
Pure expanded mineral graphite laminated. Due the natural characteristics of graphite this is a high quality material with an universal use in high pressure and temperature services. Excellent resistance to steam. Meets most refinery, petrochemical and industrial service requirements for long time periods and a wide range of temperatures.  More info
 
 
BELPAFLON PL
La plancha para juntas BELPAFLON PL est fabricada a base de material PTFE expandido 100 % puro, usando un proceso que produce una microestructura formada por un alto nmero de fibras multidireccionales, proporcionando una gran uniformidad estructural, que confiere al material las cualidades necesarias para ser utilizados en un alto rango de aplicaciones.El BELPAFLON PL es la plancha indicada para servicios donde se requiere una alta resistencia al ataque qumico, a la corrosin y en particular, en aplicaciones de la industria qumica, farmacéutica y alimenticia (Homologacin por la FDA para uso alimenticio). More info
 
  BELPAFLON PL 9000 LC
P.T.F.E sheet with an addition of special particles in order to increase the creep deformation resistance. Gasket material with an excellent chemical resistance, including acids and alcalis at high concentrations (sodium hydroxide, sulphuric acid, nitric acid, hydrogen chloride, potassium hydroxide).It is specially designed for services in which the chemical attack is combined with high pressures and temperatures improving on the traditional P.T.F.E. sheets behaviour. There is an addition of special charges that prevents the creep deformation. More info
 
  BELPAFLON PL 9005 LC
P.T.F.E sheet with an addition of special particles in order to increase the creep deformation resistance. Gasket material with an excellent chemical resistance, including acids and alcalis at high concentrations (sodium hydroxide, sulphuric acid, nitric acid, hydrogen chloride, potassium hydroxide).It is specially designed for services in which the chemical attack is combined with high pressures and temperatures improving on the traditional P.T.F.E. sheets behaviour. There is an addition of special charges that prevents the creep deformation.It is easy to cut and it has a excellent assembly and disassembly as its antistick propierties. Specially recommended in Chemical and Petrochemical Industry and Paper industry. More info
 
  BELPAFLON PL 9006 LC
P.T.F.E sheet with an addition of special particles in order to increase the creep deformation resistance, and with a high compressibility, specially recommended for use where a low bolt load applications are required ( glass flanges ). Gasket material with an excellent chemical resistance, including acids and alcalis at high concentrations (sodium hydroxide, sulphuric acid, nitric acid, hydrogen chloride, potassium hydroxide).It is easy to cut and it has a excellent assembly and disassembly as its antistick propierties. Non flammable and No ageing.Specially recommended for glass, plastic and Bioceramic flanges. More info
 

See chemical compatibility chart


go back

Copyright © Tel. (+34) 93.713.17.34 | Fax (+34) 93.713.14.64 | Email export@mcusell.com
Polgono Industrial Can Humet de Dalt Antoni Tpies 7-9 Nave F 08213 Poliny Barcelona - SPAIN - GPS: N 41.53881 E 2.16185
Disclaimer | Contact | Webs Amigas | Clonica.net